Rubber ultrasonic cutting machine is completely different, it is through the energy of ultrasound, will be cut material local heating melting, so as to achieve the purpose of cutting materials. Therefore, ultrasonic cutting does not need sharp edges, nor does it need a lot of pressure, and will not cause the material to be cut to collapse and damage. At the same time, due to the ultrasonic vibration of the cutting tool, the friction resistance is very small, and the cutting material is not easy to adhere to the blade. This is especially effective for viscous and elastic materials, frozen materials, such as food, rubber materials, inconvenient pressurized objects, etc. 

    Ultrasound cutting also has a great advantage, that is, it can melt the cutting part at the same time, and seal the cutting part, which will not cause textile material flying edge. Ultrasound cutter is a cutter which loads the ultrasonic energy directly on the cutter, and the cutter becomes a cutter with ultrasonic wave. When cutting material, the material is mainly softened and melted by ultrasonic energy. The cutting edge of the cutter only plays the role of seam location, ultrasonic energy output and separating material. This cutting method is suitable for cutting materials with rough, thick and long cutting boards which are inconvenient to set. Such as raw rubber cutting, pipe cutting, frozen meat, candy, chocolate cutting, cake cutting, printed circuit board and so on.