Ultrasonic Plastic Welding Machine PC Box Abs Welding Factory Direct Sale Digital Ultrasonic Plastic Welding Machine

Specification:

Description:

The principle of ultrasonic plastic welding is that the generator generates 20KHZ (or 15KHZ) high voltage and high frequency signals, converts the signals into high-frequency mechanical vibration through the energy conversion system, and adds them to the plastic products workpiece. The temperature from the transmission point to the interface increases through the friction of the workpiece surface and internal molecular parts. When the temperature reaches the melting point of the workpiece itself, the workpiece interface will melt rapidly, and then fill the gap between the interfaces. When the vibration stops, At the same time, the workpiece is cooled and shaped under a certain pressure to achieve welding.

Advantage:

1. It is fast and accurate, and can complete welding in 1 second

2. Mechanized production. Product quality is stable and reliable

3. Avoid using a lot of clamps and adhesives, reduce labor and reduce costs

4.High welding strength and good air tightness

5.Easy to realize automation

Equipment maintenance:

1. The accumulated water in the air filter shall be discharged in time before overflowing.

2. The sliding part of the welding machine shall be wiped clean and reapplied with high-quality lubricating grease every month after use.

3.When cleaning the side plate and surface of the welding machine, it is forbidden to use various fluxes, and neutral detergent should be used to wipe gently.

4. In order to prevent hearing damage during vibration, the processor should use hearing protector.

5.Clean the dust in the machine with dry compressed air every six months.