• 2021-05-31

The hot plate welding machine mainly uses a temperature-controlled heating plate to weld plastic parts. When welding, the heating plate is placed between the two plastic parts. When the workpiece approaches the heating plate, the plastic begins to melt. After the preset heating time, the plastic on the surface of the workpiece will melt to a certain degree. At this time, the workpieces are separat...

• 2021-05-31

Ultrasonic welding is an emerging welding method and currently has a place in the welding industry. Because the ultrasonic welding machine has the advantages of fast welding speed, high welding strength, good sealing, low cost, clean and pollution-free, will not damage the workpiece, and the welding process is stable. Next, the editor will take you to understand which industries the ultrasonic wel...

• 2021-05-31

Ultrasonic extractor is also called ultrasonic assisted extraction, ultrasonic extractor. Utilize the strong cavitation, disturbance effect, high speed, breaking, stirring and other multi-level effects produced by ultrasonic radiation pressure to increase the frequency and speed of material molecular movement, increase solvent penetration, and accelerate the target component to enter the solvent t...

• 2021-05-31

Ultrasonic vibrator is an important product in ultrasonic equipment. The ultrasonic vibrating rod generates radial vibration to the rod body through a high-power and large-amplitude transducer. Ultrasonic waves are uniformly generated 360° near the vibrating rod. Its amplitude is between ultrasonic cleaning, so the direction of use is more flexible. The ultrasonic vibrating rod can be used for any...

• 2021-05-31

1. The principle of ultrasonic cutting is completely different from traditional cutting. Ultrasonic cutting uses the energy of an ultrasonic transducer to heat and melt a part of the material to be cut, so as to achieve the purpose of cutting the material. 2. Ultrasonic cutting does not require sharp cutting edges, nor does it require a lot of pressure, and will not cause chipping or damage to the...

• 2021-05-31

Ultrasonic plastic welding is widely used in the automotive industry and can be used to weld the following parts: Turn signal, tail light, car turn signal, brake light, warning triangle, bumper, heat sink, coat rack, inner door panel, air duct, fuse box cover, center panel, car horn, glove box, instrument panel, instrument panel , Engine cover, sun visor, car Lock, car rear wing, power steering oi...

• 2021-05-28

The ultrasonic spray nozzle has the outstanding advantages of compact structure, high spraying efficiency, low flow rate (controllable), uniform spraying layer, small atomized particles, environmental protection and heating. Compared with the traditional spraying method, it can control the spraying speed and flow rate, so there will be no waste such as sputtering during the spraying process, which...

• 2021-05-28

Ultrasonic sewing machine and ultrasonic sewing machine are widely used in seamless garment industry. The fusion between two fabrics will use ultrasonic sewing machine. The ultrasonic sewing machine has a popular sewing machine platform, which can be operated skillfully without special training. It just operates like the existing sewing machine. Ultrasonic sewing machine will cut fabric with seale...