• 2021-05-28

In the ultrasonic welding process, the amplitude of the ultrasonic welding equipment plays a decisive factor in the impact of welding. Usually, we select the appropriate amplitude range according to the products to be welded. Next, Nico’s editor will lead you to learn some ultrasonic welding knowledge. Amplitude is one of the very important parameters in the ultrasonic welding machine. It has a de...

• 2021-05-28

 Rubber ultrasonic cutting machine is completely different, it is through the energy of ultrasound, will be cut material local heating melting, so as to achieve the purpose of cutting materials. Therefore, ultrasonic cutting does not need sharp edges, nor does it need a lot of pressure, and will not cause the material to be cut to collapse and damage. At the same time, due to the ultrasonic v...

• 2021-05-28

Why is the ultrasonic welding machine's welding unstable? What should I do if the welding is normal for a while and abnormal for a while? There are many reasons for the unstable welding of the ultrasonic welding machine: 1. Whether the voltage is stable; 2. Whether the air pressure is stable; 3. The frequency deviation of the mold for a long time leads to unstable welding; 4. The machine has been ...

• 2021-05-28

When using the ultrasonic welding process, many friends will encounter such a problem. During the use of the ultrasonic welding mold, wear occurs or the engraved shape of the welding head does not match the welding requirements of the product, and the mold needs to be shortened. Can the ultrasonic mold be used after it is shortened? Shortening the mold not only wastes the mold, but may also damage...

• 2021-05-28

In ultrasonic welding, air pressure transmits ultrasonic vibration to the weldment through the sonotrode. Different materials determine the amount of pressure required during welding. Choosing an appropriate air pressure value has a very important impact on the welding result. The editor below will lead you to understand the impact of the lower air pressure on ultrasonic welding. If the air pressu...

• 2021-05-28

The principle of ultrasonic cutting machine is completely different from traditional cutting. It uses ultrasonic energy to locally heat and melt the material to be cut, so as to achieve the purchase of cutting the material. Therefore, ultrasonic cutting does not require a shape edge, nor does it require a lot of pressure, and will not cause the edge of the material to be cut to collapse or be dama...

• 2021-05-28

lobal Ultrasonic Metal Welding Equipment Market to Reach $301.2 Million by 2027 Amid the COVID-19 crisis, the global market for Ultrasonic Metal Welding Equipment estimated at US$202.6 Million in the year 2020, is projected to reach a revised size of US$301.2 Million by 2027, growing at a CAGR of 5.8% over the analysis period 2020-2027. Automotive, one of the segments...

• 2021-05-28

1. When the ultrasonic vibrator is damp, you can use a megohmmeter to check the plug connected to the transducer. Check the insulation resistance value to determine the basic situation. Generally, the insulation resistance is required to be greater than 5 megohms. If the insulation resistance value is not reached, the transducer is usually damp. You can put the transducer as a whole (excluding the...